YJM-55D高压电力设备非接触智能预警系统

产品简介：

YJM-55D高压电力设备非接触智能预警系统应用安装在大型机械上，用于铁路接触网下作业车辆的an全防护，本产品适用27.5KV电压等级。

产品适用范围：

YJM-55D是为了在高铁27.5KV架空线路下运维作业车辆定制的非接触智能预警系统，主要安装在需要在高铁接触网上运维的作业车辆、消防车等车辆上，用于防止作业时与高压线路距离过近发生事故，保障作业人员、车辆an全。

预警系统分为两个模块，即发送端及接收端，发送端安装在机械臂上部用于检测及发送报警信号，接收端安装在操作室内有人机界面用于控制和报警，发送端和接收端通过2.4G无线方式传输数据，无需特别布线同时可采用临时安装方案开箱即用，提供无源开关量接口可用于机械限动或驱动报警灯等设备。

相关参数：

1.支持电压27.5KV电压。

2.报警方式：语音报警。

3.报警声量：>80dB。

4.有无源开关量输出，可用于限动。

5.支持在高压线路下及变电站等复杂电场环境施工的作业车辆，可固定式安装，也可临时加装使用方便。

联系方式：

欢迎来电咨询：18951949841(微信同号)，固定电话：025-86883571 025-84930468 QQ：3167096730

Nanjing Wendao Automation System Co. LTD

Non-contact intelligent alarm system for high voltage power equipment

[SHIANDA Anti-electric Shock Intelligent Warning System Software]

Tele:+86  02584930468   Manager:Yuanrong  18951949841 (WeChat)

mail:  CW_YR@INFOSOFTCN.COM

Non-contact intelligent alarm system for high voltage power equipment (hereinafter referred to as intelligent warning system) is a kind of intelligent warning system used when operating vehicles operate beyond the safe range of high-voltage electrical equipment requirements in the non-contact state. This intelligent warning system consists of two modules, the transmit module (transmitter) and receiver module (receiver). Transmitting through 2.4G wireless transmission with data transmission distance of over 200m under barrier-free situations, this system could meet the site distance requirement. The transmit module (transmitter) and receiver module (receiver) could apply the local power supply (12V-24V) and battery supply, The system is equipped with passive switch output and 485 output port, and the 485 output port supports MODBUS protocol which facilitates easily access to automatic control system.

The application range of this product: it can be used in aerial work vehicle, platform vehicle, fire truck, oil field, coal mine, well drilling equipment, cement pump truck, Power industry construction vehicles, cotton picker and other construction vehicles.